<meta name="keywords" content="庄家克星时时彩,Allegromicro,SI-7321M,微步进马达" />

Allegromicro SI-7321M单极2相微步进马达驱动妄图

宣布时间:2011年07月13日 14:07    宣布者:Liming
要害词: Allegromicro , SI-7321M , 微步进马达
Allegromicro公司的SI-7321M是单极2相微步进马达驱动器,接纳恒流形式使命,有满步进,半步进和1/4,1/8和1/16微步进几种选择.电源电压VBB最年夜46V,正常使命规模10V-44V,逻辑电源VDD为3.3V到5.5V,最年夜输入电流1.5A,具有四个NMOS输入MOSFET,尺度R DS(on) = 0.25 Ω,自勉励的PWM电流控制.本文简介了SI-7321M特点和优势,方框图和尺度应用电路.

The SI-7321M constant-current mode motor driver IC features efficient unipolar driver design for full- and half-step operation, and 1/4 , 1/8 , and 1/16 microstepping. The clock-in type input interface allows simplified control logic, with the flexibility of sequencer timing using either rising Clock edge only or both rising and falling edges. Additional flexibility is provided by user-configurable blanking time, and load circuit short or open protection (patent pending). Along with inputs for built-in sense current detection, these features minimize power losses.

The device has a multi-chip internal structure for lower thermal resistance. The control IC (MIC) and the four power elements (MOSFET) are all separate ICs. The package (HSOP) provides wide output terminals at each corner, further enhancing device thermal dissipation.

The built-in excitation distribution circuit (sequencer) allows motor control using only the Clock signal for simple operations (forward, reverse, hold), with motor speed control by frequency input into Clock pin, and rotation direction control by a dedicated logic input. This eliminates logic signal lines required for conventional phase-input methods, and reduces demand on heavily-used CPUs.

Low-power sleep mode, as well as reduced power during PWM off-time maximize energy savings.

SI-7321M特点和优势:

▪ Power supply voltage, VBB , 46 V maximum, 10 to 44 V normal operating range

▪ 18.6 × 9.9 mm package footprint

▪ Logic supply voltage, VDD , 3.3 to 5.5 V

Maximum output current: 1.5 A

▪ Four NMOS output MOSFETs, R DS(on) = 0.25 Ω typical

▪ Built-in sequencer

▪ Simplified clock-in stepping control

▪ Full- and half-stepping and 1/4 , 1/8 , and 1/16 microstepping

▪ Surface mount type 44-pin molded package for automatic assembly and low profile

▪ Self-excitation PWM current control with fixed off-time

▪ Microstepping off-time adjusted automatically by step reference current ratio

▪ Built-in synchronous rectifying circuit reduces losses at PWM switch-off

▪ Synchronous PWM chopping function prevents motor noise in Hold mode

▪ Built-in current sensing for each phase, set externally

▪ Dual sleep modes reduce IC input current in stand-by state

▪ Built-in protection against motor coil opens and shorts

• User-configurable operation options, set by external logic input:

▫ Blanking time: 1.8 μs or 3.6 μs

▫ Sequencer timing on Clock input rising (POS) edge or both rising and falling (POS/NEG) edges

▫ Protection features enable or disable

20110713135936234.gif
图1. SI-7321M方框图
20110713135937924.gif
图2. SI-7321M尺度应用电路图
概略请见:
迎接分享本文,转载请生涯出处:http://badahub.com/thread-70832-1-1.html     【打印本页】
您须要登录后才可以揭晓议论 登录 | 急速注册

厂商推荐

相关文章

关于我们  -  服务条目  -  应用指南  -  站点舆图  -  友谊链接  -  联系我们
庄家克星时时彩-时时彩qq群-时时彩平台推荐 © 版权所有   | 京公网安备110108881021702
回顶部
幸运五张-幸运五张规则-掌联幸运五张安卓版 捕鱼达人3-捕鱼达人3无限金币免费版 北京pk10-北京pk10新凤凰-凤凰pk10预测 安徽福彩网-安徽福彩快3网上购买 888棋牌游戏-盛大娱乐棋牌平台-棋牌电玩城送彩金 助赢时时彩-韩国时时彩助赢-韩国时时彩助赢计划 亿酷棋牌-象棋棋牌-棋牌游戏娱乐下载 北京pk10开奖-pk10赛车群-pk10开奖首选网上手游 qq捕鱼大亨-千炮捕鱼-qq游戏捕鱼大亨 时时彩后二-时时彩后二技巧-时时彩后二计划 开心棋牌-娱乐棋牌送救济金-四方棋牌送救济金 11选5软件-快赢11选5软件-11选5玩法 波克棋牌-现金牛牛棋牌-亲朋棋牌游戏手游 亲朋棋牌-舟山99棋牌-唐朝电玩城棋牌 天逸时时彩-时时彩开奖结果-时时彩全天计划稳赢版